|
Bottle Stopper Kits and Bottle Stopper Display Stands
Bottle stopper kits do not include the material for the top
piece.
Bottle stoppers
have been around since man discovered that liquids can and will
spill out of a container if there is nothing there to prevent it.
Stoppers can be used for their intended purpose or can be used as
decorations. Many people collect wood from all over the world
in the form of stoppers, they make excellent gifts and are very easy
to make.
When comparing prices please be aware that we sell only sell bottle
stopper kits made in Taiwan. |
|
A special note: |
If you are selling your stoppers I highly
recommend that you use the stainless steel model. It is a
little more expensive than some of the other models but you will
never have to worry about a customer bringing back the stopper
to you because of corrosion problems.
The black silicone wedge stoppers are designed and formulated to
seal bottles of wine. We cannot guarantee the performance
of the black silicone wedge seal should the bottle stopper kits
we sell, supplied with the black silicone wedge seal, be
used in bottles containing other types of liquids.
The stainless steel stoppers are the only
stoppers we guarantee against any form of corrosion caused by
any liquid that can be safely consumed by human beings.
When in doubt use stainless steel! |
| |
 |
Left to right:
BHW-465 large cone chrome,
BHW-467 large cone gold titanium (only 2 left, product being
discontinued), BHW-470 mini-cone stainless
steel,
BHW-471 large teardrop chrome, and the BHW-472 stainless steel
mini-teardrop |
Please read
the
Shipping Terms & Information page regarding shipping charges
before ordering.
BHW-465 Chrome Deluxe
Bottle Stoppers
These stoppers are made & plated in Taiwan and not in
China.
|
We have the cone shaped bottle stoppers
in chrome. These
stoppers are highlighted by the black silicone rubber wedge.
The thread size is 3/8"-16
threads per inch. This kit will accommodate bottles
having a 5/8" to 13/16" neck opening.
Chrome (BHW-465) |
| |
| We can ship 20 of the Deluxe stoppers
for $5.70 by Flat Rate Priority Mail, 100 stoppers for
$12.35 Flat Rate Priority Mail, or 120 stoppers for $16.85
Flat Rate Priority Mail. Postal insurance is
additional. |
| |
 |
 |
Buckeye burl stopper and
"Stopper" platinum Carbara pen
Made &
photographed by Ed Davidson |
Gold desert ironwood stopper and pens
Made & photographed by Ed Davidson |
| |
|
The
3/8"-16 threaded stud is removable.
Top diameter: .920" +/- |
Deluxe
Chrome Bottle Stoppers
To order the
Chrome BHW-465 Stoppers
Click Here
This
discount pricing shown below
only applies to the BHW-465
stoppers |
| 1-9 |
$3.50 |
| 10-49 |
$3.35 |
| 50+ |
$3.20 |
|
BHW-470
Type 304 Stainless Steel Mini-Stoppers
 |
| Top diameter: .736" +/-
Top base to point: 1.85" +/- |
| |
|
This stopper uses a different sizing bushing
than the BHW-469. If you already own one of our AZBS1
Bottle Stopper Mandrels you can buy just the sizing bushing:
No. 2 Sizing Bushing $4.50 |
| |
Machined from one solid piece of 304 Stainless steel bar
stock, these little beauties are made right here in the United
States. They come with the same reliable & long lasting black
silicone rubber wedge seal found on all of the stoppers we carry in
this style (the seals are pre-installed by us and you don't have to
worry about them breaking). This one piece unit comes with the
tenon cut with the same 3/8"-16 threads as our other black silicone
wedge stoppers. The threaded Tenon is not
removable.
The Mini-Stoppers have an overall length of 2 11/32"
(including the threaded tenon). Top of flat base to the
pointed tip measures approximately 1 7/8" long and the base diameter
measures approximately .734".
|
| We can ship 20 of the Mini stoppers
for $5.70 by Flat Rate Priority Mail, 80 stoppers for
$12.35 Flat Rate Priority Mail, or 120 stoppers for $16.85
Flat Rate Priority Mail. Postal insurance is
additional. |
|
BHW-471 Chrome Tear Drop
Bottle Stoppers
These stoppers are made & plated in Taiwan and
not in China.
| These stoppers offer a classic, old fashioned look as
well as more weight towards the bottom end of the stopper
that, for some, create a better balance. The removable
stud is threaded 1/4"-16. |
| BHW-471: The
threaded 1/4"-16 stud is removable. |
 |
Chrome Tear
Drop Bottle Stoppers
To order the
Chrome BHW-471 Stoppers
Click Here
This
discount pricing shown below
only applies to the BHW-471
stoppers
|
| 1 - 4 |
$3.99 |
| 5 - 9 |
$3.59 |
| 10 - 19 |
$3.39 |
| 20+ |
$3.19 |
|
| |
|
| ASZBS-463: The
threaded 3/8"-16 stud is not removable. |
Replacement black silicone rubber seals, full size,
$0.95 each
AZSBS-463, AZSBS-464, BHW-465, BHW-467, BHW-471 |
| We can ship 15 of the AZSPS-471
chrome teardrop stoppers for $5.70 by Flat Rate Priority
Mail, 80 stoppers for $12.35 Flat Rate Priority Mail,
or 100 stoppers for $16.85
Flat Rate Priority Mail. Postal insurance is
additional. |
BHW-472 Stainless Steel Mini-Teardrop
Bottle Stopper
| This stopper is made right here in the USA
and uses the same mandrels, sizing bushing, black silicone
rubber gasket and specialty tooling as our BHW-470 mini
stopper. |
 |
To order the
BHW-472 Stoppers
Click Here
This discount pricing shown below
only applies to the BHW-472 stoppers
New lower price! BHW-472
$5.99 each any quantity!
1-4 |
$7.75 |
5-9 |
$7.00 |
10-19 |
$6.63 |
| 20 + |
$5.99 |
Solid, one piece unit
(the 3/8"-16 threaded stud is not removable)
The BHW-472 takes the 1/2 size black silicone
wedge
Replacement black silicone rubber seals, half size,
$0.95 each
BHW-470, BHW-472 |
|
| We can ship 20 of the Mini stoppers
for $5.70 by Flat Rate Priority Mail, 80 stoppers for
$12.35 Flat Rate Priority Mail, or 120 stoppers for $16.85
Flat Rate Priority Mail. Postal insurance is
additional. |
BHW-473 Adjustable Stainless Steel & Chrome
Bottle Stopper
These stoppers are made & plated in
Taiwan and not in China.
Adjustable Bottle Stopper Kit Instructions PDF
| We have an adjustable bottle stopper
that will fit numerous bottles as well as having the added
benefit of being constructed out of 304 stainless steel and
chrome. The flat washer and screw that are exposed to
corrosive elements are made of Type 304 stainless steel.
The gaskets are made from food grade silicone rubber.
This stopper also has our standard 3/8"-16 threads so it is
compatible with all of our mandrels, buffing handles, etc. This
stopper is unique in that it adapts itself to the inside
neck opening of typical wine bottles. The various
adjustment results in tightening the top piece of the
stopper. In other words, as you tighten the stopper
(turning clockwise) the soft silicone gaskets expand thus
sealing the bottle. Turning the stopper top
counter-clockwise will reduce the size of the soft silicone
gaskets allowing the stopper to be removed from the bottle. |
| This discount pricing shown below
only applies to the BHW-473 stoppers |
| 1-4 Stoppers |
5 - 24 Stoppers |
25-49 Stoppers |
50+ Stoppers |
| $6.95 |
$6.50 |
$6.05 |
$5.75 |
To order the BHW-473 Adjustable Bottle Stoppers
Click Here
| We can ship 20 of the Adjustable
stoppers for $5.70 by Flat Rate Priority Mail, 80
stoppers for $12.35 Flat Rate Priority Mail, or 120 stoppers
for $16.85
Flat Rate Priority Mail. Postal insurance is
additional. |
Tooling to make the creation of these
stoppers a little bit easier.....
One-piece #1 Morse Taper and #2 Morse
Taper Bottle Stopper Mandrels
|
 |
We now offer two bottle stopper
mandrels manufactured from one solid piece of 304
stainless steel. These mandrels will work on all
of the bottle stoppers we carry that have a 3/8"-16
threads ( BHW-465, -466, -467, -470, -471,
-472 and
-473 series stoppers). You do not need a three- jawed
chuck or a Jacobs chuck to utilize these new mandrels.
Just install in the headstock of your lathe and away you
go.
These mandrels are made with a Number 1 and a Number 2
Morse taper and both have 3/8"-16 threads. Each
mandrel also has a 1/4"-20 threaded hole in the tail to
allow for the use of a drawbar. Here is a short
video produced by Ed Davidson on how to make and use a
drawbar:
Morse Taper Bottle
Stopper Mandrels .
These mandrels utilize the two different sizing bushings
that are used for the AZSBS-463, AZSBS-464, BHW-465, -468,
-471, -472 and -473 series stoppers. Each mandrel is sold separately
and you will need to order the correct sizing
bushing for the bottle stopper you wish to make.
Order both size sizing bushings and you are all set for
both diameters.
We recommend that you use the
3/8"-16 Norseman Bottom Tap $7.95 as well as the
5/16" Norseman Drill Bit $4.49 to make it easier to mount the
material used for the bottle stopper handle onto the
mandrels. |
Number 1 Morse Taper Bottle Stopper Mandrel $24.95
Order Here
BHW-465 through the BHW-467, BHW-471 and BHW-473 sizing
bushing
No. 1 Sizing Bushing $4.50
BHW-470 Mini-stopper sizing bushing
No. 2 Sizing Bushing $4.50
Number 2 Morse Taper Bottle Stopper Mandrel
$24.95
Order Here
BHW-465 through BHW-467, BHW-471, BHW-473 sizing bushing
BSMSB1 Sizing Bushing $4.50
BHW-470 Mini-stopper sizing bushing
BSMSB2 Sizing Bushing $4.50
|
$9.95 AZBS1
|
$9.95 AZBS2
|
Use with the
BHW-465, -467,
-471 and -473 bottle stoppers
 |
BHW-470 & BHW-472 Bottle Stoppers Only
(includes the smaller bushing)
|
|
|
The collar acts as a bushing for the proper sizing to
match
the bottle stopper.
Click Here To Order the AZBS1
11/32" Norseman TM Drill Bit
$6.59
Click Here To Order
|
The collar acts as a bushing for the proper sizing to
match the
Mini bottle stoppers
Click Here To Order the AZBS2
11/32" Norseman TM Drill Bit
$6.59
Click Here To Order
|
| |
|
Drill Chuck |
 |
| We carry a heavy duty 1/2" drill chuck and arbor
to hold the different bottle stopper mandrels. This chuck can
also be used for many other projects as well. |
Click Here
to order the
drill chuck with a #1MT arbor. Price is $29.95
Click here to order the drill chuck with #2MT arbor. Price
is $29.95
|
| |
Tapping Handle
Wrench and Bottom Tap
| We also stock 3/8"-16 bottom
taps for those who would rather drill and tap
(thread) a hole instead of just forcing the
bottle stopper block onto the mandrel. The
tap requires a 5/16" drilled hole. |
Use with the
AZSBS-463, AZSBS-464, BHW-465, -467, -470,
-471, -472 and -473 bottle stoppers
3/8"-16 Norseman Bottom Tap $7.95
5/16" Norseman Drill Bit $4.49
(for use with the 3/8"-16 bottom tap)
Large Tapping Wrench Handle $11.95 |
Bottle Stopper Buffing Handle
| Have you ever had the
sad experience of having a finished bottle stopper blank get
'caught & thrown' by a buffing wheel? Using our Delrin
handle will give you a much more secure way of buffing the
stoppers and not having to worry about dodging a run-a-way
stopper block. The handle is 7" long and comes
complete with two Delrin bushings for shallow or deep
3/8"-16 threads. This handle will work with the BHW-464,
-465, -466, -467, -469, -470, -471, -472 and the
BHW-473
series stoppers. |
| $12.50 |
|
Click Here To Order |
|
Please refer to Methods #1 and #4
pictured at the bottom of this page to see how this chuck is
used.
|
Bottle Stopper Display
Stands
 |
 |
| The Core Display Stand |
Dual Bottle Stopper
Display Stand |
| Jet black acrylic bases
combined with crystal clear columns produce a
dramatic display for your favorite stoppers.
The display measures 2 15/16" in diameter and is
2 15/16" tall. The core opening measures
15/16" and the bottom hole measures 1/4".
There are three black rubber pads under the
bottom plate for stability. |
Click Here to order the Core Display
Stand |
| Jet black acrylic base that
will display two bottle stoppers. The
front lip rolls over and has two slots that
retain the bottle stopper into the stand. This
stand measures 3 11/16" wide, is 3 3/8" deep and
is 2 3/16" tall. There are four black
rubber pads under the bottom for stability. |
Click Here to order the Dual Display
Stand |
|
Berea Hardwoods Premium
Bottle Stopper Kits
|
We supply an additional plating of Berea's classy premium bottle stopper - gold titanium. The all chrome stoppers have
been available for some time and we wanted to do something
different with them and we believe we have. The rich gold titanium plating is highlighted by the
whiteness of the "O" rings and, as you can see in the pictures
below, they really are exceptional. The long lasting
titanium plating over the solid brass body gives these stoppers
a feel not offered by other stoppers. Each stopper weighs
approximately 3 1/2 ounces. These are perfect for that special
piece of wood that you've been holding back to use on that
'special project'. |
The BHW-450 All-Chrome Bottle Stopper
These stoppers are made & plated in Taiwan and not
in China.
An excellent photo essay by Ed Davidson on how to make
the
BHW-450 and the BHW-452 stoppers can be viewed by
clicking here .
This tutorial is definitely worth viewing!
|
The threaded stud is removable
|
|
 |
|
Bocote |
Spalted Tamarin made by Ed Davidson |
|
 |
 |
|
Gold stabilized boxelder burl
with turquoise stone inlay |
Buckeye burl |
|
These three stoppers
were made and photographed by Ed Davidson
|
|
|
|
The Berea all-chrome stoppers
are made of solid brass with a heavy chrome plating and come with
two FDA approved clear rubber "O" rings (not black as shown in the
top picture). This stopper weighs 3 1/2 ounces (not including
the top) and will accommodate a bottle having a 3/4" opening or
larger. The all-chrome stoppers can easily be washed and
sanitized. This is a premium stopper. |
When combining stoppers of different plating's for
quantity pricing: The shopping cart will not show the
discounts but we will apply the appropriate discount when we process
your order.
BHW-450 All-Chrome Stopper Kit
Click Here to Order
The threaded stud is removable. Kits do not include the material for the top
piece.
This discount pricing shown
below
only applies to the BHW-450 stoppers
| 1-10 |
$6.35 |
| 11-20 |
$5.35 |
| 21-30 |
$4.50 |
| 31-49 |
$4.25 |
| 50+ |
$3.85 |
| |
| We can ship 20 of the Premium
stoppers for $5.70 by Flat Rate Priority Mail, 80
stoppers for $12.35 Flat Rate Priority Mail, or 120 stoppers
for $16.85
Flat Rate Priority Mail. Postal insurance is
additional. |
| |
|
Tooling to make the creation of the BHW-450
and BHW-452 stoppers a little bit easier.....
|
| We stock 1/4"-20 bottom taps
for those who would rather drill and tap
(thread) a hole instead of just forcing the
bottle stopper block onto the mandrel. The
tap requires a #7 drill bit |
|
|
|
Making A Bottle
Stopper
|
Compiled and
photographed by Ed
Davidson
"Mr. Bottle Stopper" |
| |
|
Here are five
different methods to
chuck a bottle
stopper blank on
your lathe. There
are probably several
more, but these are
the one's I'm most
familiar with. |
| |
| Method # 1...my favorite, with chrome cone style stopper base: Blank is mounted using Arizona Silhouette's hefty mandrel in a drill chuck on the headstock. The blank was drilled with a 23/64" bit. |
 |
| Method # 2...chrome cone style stopper base, using PSI's 1" x 8tpi chuck mounted on the headstock. The blank was drilled with a 11/32" bit. |
 |
|
 |
| Method # 4...Berea All-Chrome stopper base: Blank is mounted using Arizona Silhouette's little mandrel in a drill chuck on the headstock. The blank was drilled with a 6mm or 15/64" bit |
 |
| Method # 5...My least favorite. Chrome cone style stopper base: Blank is mounted using a 3/8" metal rod about 2" long, in a Nova scroll chuck. Note the nail that's used to wedge the blank onto the chuck. The blank hole is drilled with a 3/8" bit. |
 |
Buckeye
burl and
turquoise
inlay |
Copyright (c) 2005
Ed Davidson. All
rights reserved. |
|
|
Barry Gross and Arizona Silhouette 
